Bypass Devices

Cubro's offering for optical and electrical network bypass devices

Optical Bypass 1 Link copper  EX2 Kit

Optical Bypass 1 Link copper EX2 Kit

1 Link Gbit Ethernet Bypass switch for EX2 application

The switching mechanism offers the reliability of a solid state device

Options to activate the bypass:

  • manually via SSH or HTTP or RS232
  • power fail
  • Heartbeat in combination with any Packetmaster
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Part Nr #: CUB.HTB-BY-RJ45-1G-KIT
Copper Bypass 1 Link

Copper Bypass 1 Link

1 Link Gbit Ethernet Bypass switch

The switching mechanism offers the reliability of a solid state device

Options to activate the bypass:

  • manually via SSH or HTTP or RS232
  • power failure
  • heartbeat in combination with any Packetmaster
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Part Nr #: CBR.BYSW-Copper-1-1
Optical Bypass 1 Link SM & MM

Optical Bypass 1 Link SM & MM

1 Link Gbit Ethernet Bypass switch

The switching mechanism offers the reliability of a solid state device

Options to activate the bypass:

  • manually via SSH or HTTP or RS232
  • power fail
  • Heartbeat in combination with any Packetmaster
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CBR.BYSW-SM-1-1 | CBR.BYSW-MM-1-1
Optical Bypass 40  & 100 Gbit multi mode

Optical Bypass 40 & 100 Gbit multi mode

MEMS based Optical switch for 40 Gbit and 100 Gbit multi mode links

  • Port Bandwitdh: 40 Gbit | 100 Gbit
Modular Copper Bypass switch

Modular Copper Bypass switch

  • copper bypass module
  • fully transparent 
  • no delay
  • fast switching time
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit

Cubro Solutions

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

 

EX2 media & speed converter

In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.