Aggregation

Fiber to SFP Converter TAP converter Taps

Fiber to SFP Converter TAP

With the growing market of active and passive Twinax cables, CUBRO now offers an effective solution to monitor these links. CUBRO provides a cost-effective, flexible and small device which converts the incoming traffic to an additional output port. The CUBRO Twinax Converter Tap converts the traffic from an SFP active/passive cable, 10 Gbps Gigabit Ethernet link to an optical output. We offer an additional battery option to allow for a passive solution. The path from the input to the output ports is fault-transparent. If the link on the input port is going down, the output ports follow after a short delay. The path from the input to the output ports is layer 1 to 7 transparent. Any error on the input port will be copied to all output ports.

Specifications

  • General Functions: 10/100 tapping | 10/100/1000 tapping
  • Special Funktion: full passiv | Converter function
  • Amount of in and out ports:
    • 2 x LC Fiber and 2 x SFP
  • Port Bandwitdh: 100 Mbit | 1 Gbit
  • Supported Connections: SFP
  • Managment: no
  • Part Nr #: CBR.CONV-1-SM-R3 | CBR.CONV-1-MM-R3

Certificates

CE/FCC/ETL | CMMI Level 3 | ISO 27001 certification | ISO 9001 certification | Fully RoHS compliant | UL 60950-1 / CSA C22.2 60950-1-07 / IEC 60950-1 (2005) | EN 60950-1 (2006)

Electrical Specifications:

  • DC Input: 12VDC nominal. 1A

Mechanical Specifications:

  • Dimension (HxWxD): 3 x 11,2 x 17 cm
  • Dimension (HxWxD): 1,8 x 4,4 x 6,7 in
  • Weight : 280 g

Datasheet :

  • 19

    19" frame for 3 Cubro Modules

    19' frame for mounting in standard 19' racks, each frame can hold 3 modules