Aggregation

Twinax Converter TAP converter Taps

Twinax Converter TAP

The CUBRO Converter TAP converts traffic from optical Gigabit Ethernet links to an SFP output. With its passive connection to the network it does not influence the traffic of the optical network link while allowing complete access to the traffic via the copper 1000B-T monitoring port. CUBRO provides a cost-effective, flexible and small device which converts the incoming traffic to an additional output port. The CUBRO Converter TAP uses SFP modules giving maximum flexibility to the user. It is possible to change or add SFPs during operation without interrupting other ports (hot-swap). Moreover, it is possible to use non-vendor specific SFPSs: SM, MM, COPPER, CWDM, BIDI in any combination. The path from the input to the output ports is fault-transparent. If the link on the input port is going down, the output ports follow with a short delay. The path from the input to the output ports is layer 1 to 7 transparent. Any error on the input port will be copied to all output ports.

Specifications

  • General Functions: 10/100 tapping | 10/100/1000 tapping
  • Special Funktion: Converter function
  • Amount of in and out ports:
    • 2 x LC Fiber and 2 x SFP
  • Port Bandwitdh: 10 Gbit
  • Supported Connections: SFP
  • Managment: no
  • Part Nr #: CBR.TWINAX-1-SM-R3 | CBR.TWINAX-1-MM-R3

Certificates

CE/FCC/ETL | CMMI Level 3 | ISO 27001 certification | ISO 9001 certification | Fully RoHS compliant | UL 60950-1 / CSA C22.2 60950-1-07 / IEC 60950-1 (2005) | EN 60950-1 (2006)

Electrical Specifications:

  • DC Input: 12VDC nominal. 1A

Mechanical Specifications:

  • Dimension (HxWxD): 1,6 x 19 x 15,5 inch
  • Dimension (HxWxD): 3 x 11,2 x 17 cm
  • Weight : 280 g

Datasheet :

  • 19

    19" frame for 3 Cubro Modules

    19' frame for mounting in standard 19' racks, each frame can hold 3 modules