Aggregation

electrical (copper) Taps

Taps with copper RJ 45 interfaces Bandwidth 10/100/1000 & 10 Gbit BASE-T

10/100 Mbit Taps are full passive devices Gbit and 10 Gbit are active devices.

10/100/1000 Mbit Copper Tap flex

10/100/1000 Mbit Copper Tap flex

  • fully passive
  • Carrier Grade Design
  • 10/100/1000 Mbit
  • 19' rack mountable (20 units in one 3 U 19' frame)
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Part Nr #: CBR.FLEX-T1000
Cubro copper tap

10/100/1000 Mbit Copper Tap

  • Carrier Grade Design
  • 10/100/1000 Mbit
  • SFP output
  • PoE paththrough
  • PoE powering (optional)
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Part Nr #: CBR.TAP-10/100/1000
10/100 Mbit Copper Tap flex

10/100 Mbit Copper Tap flex

  • fully passive
  • Carrier Grade Design
  • 10/100 Mbit
  • EN 50129 European Railway certification
  • 19' rack mountable (20 units in one 3 U 19' frame)
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Part Nr #: CBR.FLEX-T100
10/100 Mbit passive Copper Tap

10/100 Mbit passive Copper Tap

  • fully passive
  • Carrier Grade Design
  • 10/100 Mbit
  • EN 50129 European Railway certification
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Part Nr #: CBR.TAP-10/100
Cubro passive TAP rack mount

Cubro passive TAP rack mount

The CUBRO µTap is designed to tap one 10/100 Base-T link. This small, flexible and cheap Tap that doens't require electricity is the ideal device for users who only need monitoring from time to time.

 

  • Port Bandwitdh: 10 Mbit | 100 Mbit
Cubro micro TAP

Cubro micro TAP

The micro TAP is designed to tap one 10/100 Base-T link.

This small, flexible and cheap Tap that doesn't require electricity is the ideal device for users who only need monitoring from time to time.

  • Port Bandwitdh: 10 Mbit | 100 Mbit

Cubro Solutions

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

EX2 media & speed converter

In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

 

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

STP Monitoring multi 100 Mbit links

To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.