Aggregation

10/100 Mbit passive Copper Tap electrical (copper) Taps

10/100 Mbit passive Copper Tap

Evaluation of network health and finding performance bottlenecks is a vital issue in todays competitive telecommunications world. CUBRO TAPs help to get the job done and to find network problems before the users are affected. 100 % passive no packet loss at power down.

Specifications

  • General Functions: 10/100 tapping
  • Special Funktion: full passiv
  • Amount of in and out ports:
    • 4 x RJ45 10-100
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Supported Connections: RJ45
  • Managment: no
  • Part Nr #: CBR.TAP-10/100

Certificates

CE/FCC/ETL | CMMI Level 3 | ISO 27001 certification | ISO 9001 certification | Fully RoHS compliant | UL 60950-1 / CSA C22.2 60950-1-07 / IEC 60950-1 (2005) | EN 60950-1 (2006)

Electrical Specifications:

  • DC Input: 12VDC nominal. 1A

Mechanical Specifications:

  • Dimension (HxWxD): 3 x 11,2 x 17 cm
  • Dimension (HxWxD): 1,8 x 4,4 x 6,7 in
  • 19

    19" frame for 3 Cubro Modules

    19' frame for mounting in standard 19' racks, each frame can hold 3 modules

  • Cubro Solutions

    aggregation 40 x 10 Gbit links with one EX 20400

    Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
    The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
    a 40 Gbit port into 4 independent 10 Gbit ports.

    Amplification

    You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

    Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

    This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

    A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

    Stacking Packetmasters

    Customer Solution!

    Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

    Cubro NPB units support bypass function

    The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

     

    Packetmaster as Patchfield

    The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

    STP Monitoring multi 100 Mbit links

    To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

    GRE de - encapsulation

    Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

    Aggregation of an 10 Gbit link and output to an 10 Gbit port

    Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

    Monitoring offload

    The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

    • Reduce Monitoring cost by off-loading the existing monitoring system.
    • Reducing not only Capex also Opex goes down because of less hardware resources.
    • Still the full metadata information on user plan traffic.

    EX2 media & speed converter

    In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.