Aggregation

Cubro passive TAP rack mount electrical (copper) Taps

Cubro passive TAP rack mount

The CUBRO µTap is designed to tap one 10/100 Base-T link. This small, flexible, powerless and cheap Tap is the ideal device for users who only need monitoring from time to time.

The setup is very simple and needs no
configuration at all. On the monitoring output any standard NIC card can be used as receiving device in combination with any capture tool „example: Wireshark“

But you need two Nic cards to capture both directions !

In case you don't have two Nic cards in your computer you can use the Cubro Ethernet USB Converter. This plug and play device adds to full ethernet interfaces to your computer, and then you can capture poth directions with ease.

 

Specifications

  • General Functions: 10/100 tapping
  • Special Funktion: full passiv
  • Amount of in and out ports:
    • 4 x RJ45 10-100
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Supported Connections: RJ45
  • Managment: no

Certificates

ISO 9001 certification | Fully RoHS compliant

Datasheet :

  • USB 3.0 to Dual Port Gigabit Ethernet Adapter

    USB 3.0 to Dual Port Gigabit Ethernet Adapter

    The Cubro USB 3.0 to Dual Port Gigabit Ethernet Adapter lets you add two Gigabit Ethernet ports to your laptop or Ultrabook™ computer through a single USB 3.0 port, and features an integrated USB 3.0 pass-through port that keeps your USB port available for use with external storage or other peripherals. Each RJ45 port supports 10/100/1000 Mbps Ethernet and is fully compatible with IEEE 802.3i/u/ab standards.

  • Cubro Solutions

    aggregation 40 x 10 Gbit links with one EX 20400

    Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
    The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
    a 40 Gbit port into 4 independent 10 Gbit ports.

    GRE de - encapsulation

    Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

    Stacking Packetmasters

    Customer Solution!

    Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

    EX2 10 Gbit monitoring with load balanced output

    Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

    384 x 10 Gbit ports cross connect

    We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

    • 400 Gbit backbone
    • tunneling via VXLAN
    • non blocking
    • any to any & many to any & any to many support
    • easy expandable

     

    Aggregation of an 10 Gbit link and output to an 10 Gbit port

    Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

    EX2 Multi Gbit Cooper aggregation

    The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.

    Cubro NPB units support bypass function

    The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

     

    Amplification

    You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

    STP Monitoring multi 100 Mbit links

    To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

    EX2 media & speed converter

    In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.