Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

  1. You must connect the only the TX from the span port with the RX from the EX2+. The TX from the EX2+ are still available.
  2. One of this TX are used as output to the probe.
  3. Because of a security feature, an optical interface did not start sending until it receives light on the RX.
  4. So we use the second TX on the EX2+ to produce this light, (not traffic only layer 1 light)
  5. In this case we need to light sources because we have two span ports, so we use the optical

TAP to split the light in two and connect this with the RX of the span ports.

      Finally you must do a filter input 1 -> output 1 and output 2 -> output 1

      Mission accomplished  

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

Complexity

easy

Share this Cubro Solution

Cubro Solutions

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

EX2 media & speed converter

In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

STP Monitoring multi 100 Mbit links

To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.