GTP load balancing application

Written by Super User on 03 July 2016

GTP load balancing application

Load balancing GTP traffic is very imported when mobile network monitoring is needed, because the load in mobile networks is growing more than the performance of the probes. That is the reason why LB is a must in monitoring applications. The Sessionmaster support this in two ways based on TEID and load balancing on the inner IP address.

Related Information

  • Date: Thursday, 07 July 2016
  • Hits: 1497

Cubro Solutions

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.