SFP MEDIACONVERTER 1 GBIT & 10 GBIT

 SFP  MEDIACONVERTER  1 GBIT & 10 GBIT

SFP - SFP Media Converter combining data rate independent connectivity with support for SFP and SFP+ transceivers. The CUBRO MeDiCon 10 G defines a new level of deployment flexibility and inventory management. Enabling the implementation of an extremely wide range of optical infrastructure solutions from media conversion and signal boosting to lambda conversion, Wavelength Division Multiplexing (WDM) and Optical Add/Drop Multiplexing (OADM).

Sync-E and IEEE1588 ready

The Cubro MeDiCon 10 G is also suitable for Sync-E networks if no copper SFPs are used. If your network is carrying IEEE 1588 Sync traffic standard mediaconverters with switches inside it could produce a delay depending on the traffic load. This delay variation has a bad impact on the quality of the sync signal. The Cubro MeDiCon 10 G has a very small delay of 500 ps. This delay is stable and is not dependent on the traffic load.

Specifications

  • Size: 100 x 55 x 27 mm
  • Weight: < 100 g
  • Datasheet:

Share this product

Cubro Solutions

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

STP Monitoring multi 100 Mbit links

To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.