Items tagged with AGGREGATION

Packetmaster EX48400

Packetmaster EX48400

  • Carrier Grade Design
  • 4 x 100 Gbit + 2 x 40 Gbit + 48 x 1/10 Gbit or
    6 x 40 Gbit + 48 x 1/10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • Aggregation
  • L4 Traffic modification
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Packetmaster EX20400

Packetmaster EX20400

  • Carrier Grade Design
  • 20 x 40 Gbit + 4 x 10 Gbit or
    4 x 100 Gbit +16 x 40 Gbit + 4 x 10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Aggregation
  • L4 Traffic modification
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Packetmaster EX5-2

Packetmaster EX5-2

  • Carrier Grade Design
  • 48 1 Gbit RJ45 + 4 x 10 Gbit SFP+
  • RJ45 SFP & SFP+
  • Layer 4 Filtering
  • Aggregation
  • Traffic modification
  • session aware load balancing
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit | 10 Gbit
  • Part Nr #: CUB.PM-EX5-2

Cubro Solutions

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

EX2 media & speed converter

In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.