Items tagged with BYPASS

Packetmaster EX48400

Packetmaster EX48400

  • Carrier Grade Design
  • 4 x 100 Gbit + 2 x 40 Gbit + 48 x 1/10 Gbit or
    6 x 40 Gbit + 48 x 1/10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • Aggregation
  • L4 Traffic modification
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Packetmaster EX20400

Packetmaster EX20400

  • Carrier Grade Design
  • 20 x 40 Gbit + 4 x 10 Gbit or
    4 x 100 Gbit +16 x 40 Gbit + 4 x 10 Gbit
  • SFP & SFP+ & QSFP
  • Layer 4 filtering + UDF filtering
  • GRE|VXLAN|NVGRE|MLAG|GENEVA
  • Aggregation
  • L4 Traffic modification
  • Session aware load balancing
  • Packet slicing in line rate
  • Port Bandwitdh: 1 Gbit | 10 Gbit | 40 Gbit | 100 Gbit
  • Part Nr #: CUB.PM-EX20400
Packetmaster EX5-2

Packetmaster EX5-2

  • Carrier Grade Design
  • 48 1 Gbit RJ45 + 4 x 10 Gbit SFP+
  • RJ45 SFP & SFP+
  • Layer 4 Filtering
  • Aggregation
  • Traffic modification
  • session aware load balancing
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit | 10 Gbit
  • Part Nr #: CUB.PM-EX5-2
Optical Bypass 40  & 100 Gbit multi mode

Optical Bypass 40 & 100 Gbit multi mode

MEMS based Optical switch for 40 Gbit and 100 Gbit multi mode links

  • Port Bandwitdh: 40 Gbit | 100 Gbit
Modular Copper Bypass switch

Modular Copper Bypass switch

  • copper bypass module
  • fully transparent 
  • no delay
  • fast switching time
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit

Cubro Solutions

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

EX2 10 Gbit monitoring with load balanced output

Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

STP Monitoring multi 100 Mbit links

To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

Cubro NPB units support bypass function

The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

 

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.